Sim900 GSM GPRS Development Board

{"id":6319501934766,"title":"Sim900 GSM GPRS Development Board","handle":"sim900-gsm-gprs-development-board","description":"\u003cp\u003eThe GPRS\/GSM shield allows an Arduino board to communicate using the GSM cell phone network. It allows an Arduino board to connect to the internet, send and receive SMS, and make outgoing and incoming voice calls.\u003c\/p\u003e\n\u003cp\u003eTo illustrate, Arduino board perceives a GSM shield as a modem; while the GSM\/mobile operator perceives a GSM shield as a mobile phone. This GPRS shield is based on SIM900 module, which is a complete Quad-band GSM\/GPRS module and delivers GSM\/GPRS 850\/900\/1800\/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. Besides the communication features, this shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module present on-board.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe shield is compatible with the Arduino and with all boards which have the same form factor as a standard Arduino Board such as Mega, Mega ADK, Yun, and Leonardo boards. It is configured and controlled through UART using simple AT commands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill work on GSM networks in all countries across the world.\u003c\/li\u003e\n\u003cli\u003eCompliant to GSM phase 2\/2+\u003c\/li\u003e\n\u003cli\u003eEasy control using AT commands\u003c\/li\u003e\n\u003cli\u003eEnable sending SMS over the network\u003c\/li\u003e\n\u003cli\u003eAllows uploading of data to a web server\u003c\/li\u003e\n\u003cli\u003eRTC supported\u003c\/li\u003e\n\u003cli\u003eSelectable serial port\u003c\/li\u003e\n\u003cli\u003eWith speaker and headphone jacks\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eQuad-Band 850 \/ 900\/ 1800 \/ 1900 MHz - would work on GSM networks in all countries across the world\u003c\/li\u003e\n\u003cli\u003eGPRS multi-slot class 10\/8\u003c\/li\u003e\n\u003cli\u003eGPRS mobile station class B\u003c\/li\u003e\n\u003cli\u003eCompliant to GSM phase 2\/2+\u003c\/li\u003e\n\u003cli\u003eClass 4 (2 W @ 850 \/ 900 MHz)\u003c\/li\u003e\n\u003cli\u003eClass 1 (1 W @ 1800 \/ 1900MHz)\u003c\/li\u003e\n\u003cli\u003eControl via AT commands - Standard Commands: GSM 07.07 \u0026amp; 07.05 | Enhanced Commands: SIMCOM AT Commands\u003c\/li\u003e\n\u003cli\u003eShort Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)\u003c\/li\u003e\n\u003cli\u003eEmbedded TCP\/UDP stack - allows you to upload data to a web server\u003c\/li\u003e\n\u003cli\u003eRTC supported\u003c\/li\u003e\n\u003cli\u003eSelectable serial port\u003c\/li\u003e\n\u003cli\u003eSpeaker and Headphone jacks\u003c\/li\u003e\n\u003cli\u003eLow power consumption - 1.5mA(sleep mode)\u003c\/li\u003e\n\u003cli\u003eIndustrial Temperature Range - -40°C to +85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Sim900 GSM GPRS Development Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-02-08T12:13:43+10:00","created_at":"2021-02-08T12:13:41+10:00","vendor":"KiwiGuy Computers","type":"Micro Controller","tags":["SIM"],"price":2999,"price_min":2999,"price_max":2999,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38106554925230,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BC0000289","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Sim900 GSM GPRS Development Board","public_title":null,"options":["Default Title"],"price":2999,"weight":42,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/Sim900GSMGPRSDevelopmentBoard.jpg?v=1660866446","\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_32c65517-b654-467f-8da7-a0df9c6d7e64.jpg?v=1660866446","\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_1_fa61ea14-b2b0-4310-b1d8-a60633616a31.jpg?v=1660866445"],"featured_image":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/Sim900GSMGPRSDevelopmentBoard.jpg?v=1660866446","options":["Title"],"media":[{"alt":"Sim900 GSM GPRS Development Board","id":30539657511160,"position":1,"preview_image":{"aspect_ratio":1.252,"height":705,"width":883,"src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/Sim900GSMGPRSDevelopmentBoard.jpg?v=1660866446"},"aspect_ratio":1.252,"height":705,"media_type":"image","src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/Sim900GSMGPRSDevelopmentBoard.jpg?v=1660866446","width":883},{"alt":null,"id":30539657543928,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_32c65517-b654-467f-8da7-a0df9c6d7e64.jpg?v=1660866446"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_32c65517-b654-467f-8da7-a0df9c6d7e64.jpg?v=1660866446","width":1000},{"alt":null,"id":30539657576696,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_1_fa61ea14-b2b0-4310-b1d8-a60633616a31.jpg?v=1660866445"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.kiwiguycomputers.com.au\/cdn\/shop\/products\/ezgif.com-gif-maker_1_fa61ea14-b2b0-4310-b1d8-a60633616a31.jpg?v=1660866445","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe GPRS\/GSM shield allows an Arduino board to communicate using the GSM cell phone network. It allows an Arduino board to connect to the internet, send and receive SMS, and make outgoing and incoming voice calls.\u003c\/p\u003e\n\u003cp\u003eTo illustrate, Arduino board perceives a GSM shield as a modem; while the GSM\/mobile operator perceives a GSM shield as a mobile phone. This GPRS shield is based on SIM900 module, which is a complete Quad-band GSM\/GPRS module and delivers GSM\/GPRS 850\/900\/1800\/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. Besides the communication features, this shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module present on-board.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe shield is compatible with the Arduino and with all boards which have the same form factor as a standard Arduino Board such as Mega, Mega ADK, Yun, and Leonardo boards. It is configured and controlled through UART using simple AT commands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill work on GSM networks in all countries across the world.\u003c\/li\u003e\n\u003cli\u003eCompliant to GSM phase 2\/2+\u003c\/li\u003e\n\u003cli\u003eEasy control using AT commands\u003c\/li\u003e\n\u003cli\u003eEnable sending SMS over the network\u003c\/li\u003e\n\u003cli\u003eAllows uploading of data to a web server\u003c\/li\u003e\n\u003cli\u003eRTC supported\u003c\/li\u003e\n\u003cli\u003eSelectable serial port\u003c\/li\u003e\n\u003cli\u003eWith speaker and headphone jacks\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eQuad-Band 850 \/ 900\/ 1800 \/ 1900 MHz - would work on GSM networks in all countries across the world\u003c\/li\u003e\n\u003cli\u003eGPRS multi-slot class 10\/8\u003c\/li\u003e\n\u003cli\u003eGPRS mobile station class B\u003c\/li\u003e\n\u003cli\u003eCompliant to GSM phase 2\/2+\u003c\/li\u003e\n\u003cli\u003eClass 4 (2 W @ 850 \/ 900 MHz)\u003c\/li\u003e\n\u003cli\u003eClass 1 (1 W @ 1800 \/ 1900MHz)\u003c\/li\u003e\n\u003cli\u003eControl via AT commands - Standard Commands: GSM 07.07 \u0026amp; 07.05 | Enhanced Commands: SIMCOM AT Commands\u003c\/li\u003e\n\u003cli\u003eShort Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)\u003c\/li\u003e\n\u003cli\u003eEmbedded TCP\/UDP stack - allows you to upload data to a web server\u003c\/li\u003e\n\u003cli\u003eRTC supported\u003c\/li\u003e\n\u003cli\u003eSelectable serial port\u003c\/li\u003e\n\u003cli\u003eSpeaker and Headphone jacks\u003c\/li\u003e\n\u003cli\u003eLow power consumption - 1.5mA(sleep mode)\u003c\/li\u003e\n\u003cli\u003eIndustrial Temperature Range - -40°C to +85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eContents\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Sim900 GSM GPRS Development Board\u003c\/li\u003e\n\u003c\/ul\u003e"}

The GPRS/GSM shield allows an Arduino board to communicate using the GSM cell phone network. It allows an Arduino board to connect to the internet, send and receive SMS, and make outgoing and incoming voice calls.

To illustrate, Arduino board perceives a GSM shield as a modem; while the GSM/mobile operator perceives a GSM shield as a mobile phone. This GPRS shield is based on SIM900 module, which is a complete Quad-band GSM/GPRS module and delivers GSM/GPRS 850/900/1800/1900MHz performance for voice, SMS, Data, and Fax in a small form factor and with low power consumption. Besides the communication features, this shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module present on-board.

The shield is compatible with the Arduino and with all boards which have the same form factor as a standard Arduino Board such as Mega, Mega ADK, Yun, and Leonardo boards. It is configured and controlled through UART using simple AT commands.

Features

Will work on GSM networks in all countries across the world.
Compliant to GSM phase 2/2+
Easy control using AT commands
Enable sending SMS over the network
Allows uploading of data to a web server
RTC supported
Selectable serial port
With speaker and headphone jacks
Low power consumption

Specifications

Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world
GPRS multi-slot class 10/8
GPRS mobile station class B
Compliant to GSM phase 2/2+
Class 4 (2 W @ 850 / 900 MHz)
Class 1 (1 W @ 1800 / 1900MHz)
Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands
Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal)
Embedded TCP/UDP stack - allows you to upload data to a web server
RTC supported
Selectable serial port
Speaker and Headphone jacks
Low power consumption - 1.5mA(sleep mode)
Industrial Temperature Range - -40°C to +85 °C

Sim900 GSM GPRS Development Board

Specifications

Contents

Your Cart