DSO150 Portable Digital Oscilloscope

This digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It's easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

Features

• Adopt ARM Cortex-M3 processor (STM32F103C8), and include a 2.4-inch color TFT display screen.
• Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
• Come with instructions, easy to install and operate.
• With Auto/Normal/Single trigger modes, easy to capture the moment waveform.
• Available rising or falling edge trigger.
• Observable previous waveform before trigger(negative delay).
• Can freeze waveform display at any time(HOLD function).
• With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
• Waveform storage function: will not lose the waveform after power off.
• Short-circuit and open-circuit detection: can help the user find out the soldering error.
• TFT controller recognition function.
• The SMD has been soldered, more suitable for electronic beginner.

Specifications

• Maximum Real-time Sampling Rate: 1MSa/s
• Analog Bandwidth: 0-200KHz
• Sensitivity Range: 5mV/div-20mV/idv
• Maximum Input Voltage: 50Vpk (1X probe)
• Input Impedance: 1M ohms/20pF
• Accuracy: 12 Bits
• Record Length: 1024 points
• Coupling Modes: DC / AC / GND
• Time Base Range: 500s/Div - 10us / Div
• Trigger Modes: Auto, Normal, and Single
• Trigger Position: Center of Buffer
• Supply Voltage: DC 9V(8-10V)
• Current Consumption:~120mA @ 9V
• Main Board Size: 94 * 65mm / 3.7 * 2.56in
• Analog Board Size: 65 * 47mm / 2.56 * 1.85in
• Screen Size: 52 * 40mm / 2 * 1.57in
• Package Size: 14.5 * 10 * 3.7cm / 5.7 * 3.94 * 1.45in
• Package Weight: 179g / 6.33oz

Contents

• 1 x DSO150 Portable Digital Oscilloscope